View MADP-000234-10720_5064492.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MADP-000234-10720T
MELF PIN Diode RoHS Compliant
Absolute Maximum Ratings1,2 @ 25C
Parameter Forward Voltage Reverse Voltage Operating Temperature Storage Temperature Mounting Temperature Absolute Maximum
Cathode
Rev. V3
Case Style ODS 1072
0.85 V -500 V -55C to +150C -55C to +175C +260C for 360 seconds
A
A
B Solderable Surfaces
C
1. Exceeding these limits may cause permanent damage to the device. 2. Values will de-rate over temperature.
Size Inches (mm) Case Style
1072
A (sq) Min./Max.
0.080/0.095 (2.032/2.413)
B Min./Max.
0.115/0.135 (2.921/3.429)
C Min./Max.
0.008/0.030 (.203/.762)
All tolerances are .001" ( .025 mm).
Handling Procedures
The following precautions should be observed to avoid damaging these devices.
Cleanliness and Storage
These devices should be handled and stored in a clean environment. Ends of the device are tin plated for greater solderability. Continuous exposure to high humidity (>80%) for extended periods may cause the surface to oxidize. Caution should be taken when storing devices for long periods.
RoHS
The MADP-000234-10720T is fully RoHS compliant meaning it contains less than the maximum allowable concentration of 0.1% by weight in homogenous materials for lead, hex chrome, mercury, PBB, PBDE, and 0.01% for cadmium.
ESD
These devices are susceptible to ESD and are rated Class 1.
Mounting Techniques
Solder Attach
Typical wave soldering or reflow techniques may be used to mount M/A-COM's SMQ packages to circuit boards using Sn63/Pb37 alloy or RoHS compliant solders. For more information visit the M/A-COM website and read application note M538 at:http:// www.macom.com/FileMapServlet/redirect.red? o=M538&t=0
General Handling
Device can be handled with tweezers or vacuum pickups and are suitable for use with automatic pick-and-place equipment.
1
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MADP-000234-10720T
MELF PIN Diode RoHS Compliant
Electrical Specifications @ TA = +25C
Rev. V3
Part Number
Minimum Reverse 2 Voltage IR <10A Volts 500
Maximum Capacitance CT @100V f = 1MHz pF 1.5
Maximum Series Res. RS @100mA f = 100MHz 0.25
CW Power Dissipation Rating
Nominal Characteristics Typical IF When RS = 75 mA -- Carrier 3 Lifetime S 3.0 I-Region Width mils 50.0
MADP-000234-10720T
Watts 3.0
Notes
1. Rs is measured on an HP4191A Impedance Analyzer 2. Minority Carrier Lifetime Measured at from 50% Control Voltage to 50 % Output Voltage.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.

▲Up To Search▲

Price & Availability of MADP-000234-10720

	To Download MADP-000234-10720 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .